keywords: protective film
 
       
   Product list
   Protective Film
   Adhesive Tape
   Stretch Wrap Film
Tel :0086-510-83452956-802
Fax:0086-510-83452959
Web:www.protective-film.net
email: joey.zhou@3452956.com
 
Home < new <news
 How to stick to the phone or the protective film the most perfect game?

In fact, as long as you stick protective film to grasp some tips and tricks, in fact, is very simple. How well protective film paste, there are two factors, namely, protective film and the film itself, the quality of the technical operations of those.

First, the protective film of choice, sure to choose non-electrostatic adsorption glue, stronger light transmittance, and film have a certain thickness and hardness, scratch resistance to be able to achieve results. Protective film itself does not have watermarks or "chlamydia" (ie, the surface protective film is not easy to see as small points, like grains of sand.) Personal protective film recommended by a professional brand - qida.

Second, protective film is pasted. The most important step in paste before the screen is clean, make sure the screen is not a dust, a tiny piece of dust will be produced to protect the film can not afford to push the bubbles (some bubbles are caused by improper pasting method, so that bubbles can scrape card and launch it); whether IPHONE or PSP, the screen is basically digital products are the same.

Clean the screen method: first, to repeatedly clean the screen, not once twice and leave. Can first use the cloth to wipe the screen surface, and then repeated professional cleaning wipe the screen, especially the edge of the screen slits, it is susceptible to fine dust, can be wrapped with a cloth nail tip gently scrape along the edge of what ; then, the general good is the three-tier structure of the protective film, can not tear off that layer (the fingers do not touch the paste surface, so as to avoid sticky fingerprints dust), stick to the screen and then peeled off, making the final step cleaning work.

Paste Method: paste before the first protective film can be determined what position on the screen, opened a corner, slowly pulled down along the screen, while side and pull with your fingers to flatten the protective film, the middle of the bubble if found, immediately upward off a little bit of re-paste, or use bank cards scratch cards to bubble from the edge of the pushed out, or not, then prove that this place of dust, with a clear plastic to the bubble where the parts of the screen and protective film are sticky bit to ensure dust thoroughly Clear.

In short, three aspects of quality of the protective film, thoroughly clean the screen, paste the correct way, with all three, is immune to imperfection!

Come from: http:// www.protective-film.net

Previous:How to improve the transparency of protective film?

Nex: ......

 
Products
 
 
Home  |  Products | About Us  |  Protection film  |  New Center  |  Factory  |  Contact Us  |  Sitemap  |  Chinese
© 2011 Wuxi Qida Tape Co., Ltd. Powered by cn0510.net